Jo Jun 11, 2022
Ro Yong Sim, a researcher at the Faculty of Electrical Engineering, has applied, in her subject Servo Motor Design, a new examination method in which students are given questions in multimedia and allowed to consult references, in contrast with traditional examination methods in which only theoretical problems and complicated design calculations were given, in order to evaluate correctly their theoretical and practical abilities to design different servo motors.
Primarily, in order to evaluate students’ design ability she gives questions for the characteristic parameters of servo motors whose dimensional structures difficult to be expressed in words are shown in movies and images and allows them to consult all available references to calculate them.
The questions are made to be solved only when they have gone through several steps of calculation while grasping the correct meaning of all the variables in complicated design equations.
Then the students, on the basis of the decision of what kind of servo motor it is from the images and movies, calculate the characteristic parameters such as time constant or inertia, which makes it possible to evaluate their design ability for a particular object.
Secondly, she presents questions in images to evaluate the practical ability to understand design plans.
In other words, she blanks or makes errors in some parts of the plan of a servo motor shown in image to make the students correct them.
The students are supposed to write on their exam paper which parts contain errors and how the errors should be corrected.
Thirdly, she uses questions to estimate the computer aided design ability of the students.
For example, to test the analysis ability of the students by Ansoft Maxwell software, she distributes to students’ computers a program file which has analysis conditions beforehand and encounters an error because of some mistakes made during modeling and analyzing. The students come to use some software tools to correct the errors. She makes them write or draw on the paper the cause of errors, the resultant parameter values and graphs.
Fourthly, she uses multimedia for questions to estimate their theoretical knowledge, too.
For example, while showing a movie in which a three-phase hybrid-type stepper motor is rotating, she pauses the movie at any moment and asks students to draw an equivalent magnetic circuit at that point. This enables her to evaluate if they have a correct understanding in detail of the operating principle of the stepper motor.
Finally, she uses multimedia to evaluate the creative ability of the students.
For example, in the past she used to ask, “What methods to decrease the cogging torque of a permanent magnet electric machine are there?”, but now she first shows the parts and assemblies of a permanent magnet synchronous motor in multimedia and then gives questions like how this motor could decrease cogging torque and what else could be done for that.
So she can evaluate on the basis of a particular object if the students grasp the theory and know how to apply it to the practice.
Besides, by giving a task to design permanent magnet about that object, she could test the creative design ability of the students in a comprehensive way such as if they select the optimal pole embrace to minimize the cogging torque, if they set reasonable air gap, if they choose proper material for permanent magnet or if they rationally design dimensions like the width and the thickness of the poles.
She makes such questions with PowerPoint software, sends them to every computer of the students, and allows them to use all the materials such as computers, textbooks and reference books during the test while she prevents them from exchanging information through the network.
Applying this testing method she has been able to correctly evaluate the practical ability as well as the theoretical knowledge of the students and fully stimulate the interest in their study.
...
Jo Jun 7, 2022
Koguryo, first feudal state in our country, lasted for nearly a thousand years from 277 B.C. to 668 A.D., holding the central position and playing a leading role in the development of history of our country.
The founder is Sejo, King Tongmyong (Ko Ju Mong). When he became the lawful successor to the king of Kuryo, he formed a new feudal system in 277 B.C. and named it Koguryo. He had its capital Jolbon Castle (castle on the mountain) built within a few years and merged several neighbouring countries in ten years’ time, enlarging Koguryo into a fairly big country that stretched 2 000 ri (1 ri = about 393m) from east to west.
The capital moved from Jolbon Castle to Kuknae Castle (Jipanhyon) in 3 A.D., to Pyongyang Castle (Mt. Taesong area) in 427, to new Pyongyang Castle (Jangan Castle) in 586. Hwando Castle 2 (North Pyongyang Castle, Ponghwang Castle) and South Pyongyang Castle (Mt. Jangsu area, later Han Castle) became the second capitals between the late 4th century and the early 5th century, forming a system of 5 capitals.
With rapid progress in several fields of politics, military affairs, economy and culture after the establishment, Koguryo emerged as one of the most developed countries in Asia in those days and demonstrated its prominently advanced culture out to the whole world.
For some centuries B.C. and A.D., feudal relationship was consolidated and developed and the whole well-regulated feudal system was established in Koguryo, which became the main framework of the state and social systems of subsequent several feudal states in our country as well as Paekje and Silla.
From the end of the 2nd century B.C. Koguryo people loaded with a high sense of patriotism and military spirit played the role as a fort and a shield to defend the entire land and fellow countrymen by repulsing foreign forces of aggression.
Koguryo set territorial unification as its important policy and put a lot of effort to realize it. As a result, in the west it merged several small countries in the southeast of Ryodong Peninsula by the 70s in the first century, in the southwest the northern part of Raknangguk, and in the east and the south Kaema, Kuda, Jona, Juna, East Okjo and other 7 small countries. In the north it defeated Ancient Puyo at the end of the 3rd century B.C. and took several small countries subject to Puyo under its control. After the establishment of Later Puyo feudal state in the early 2nd century B.C., it took control of the southern part of Jilin area and merged Kalsaguk.
The struggle of Koguryo for territorial unification was carried out along with anti-aggressive struggles. In 529 Koguryo extended its territory to the faraway bounds of Asan Bay, which brought unification of Three Kingdoms to the verge of completion in the first half of the 6th century.
Moreover, Koguryo developed various fields of its economy and culture, exerting a great influence upon the development of economy and culture of the neighbouring countries of the same blood and spreading its advanced culture even abroad.
In summary, Koguryo was a strong country with vast territory and advanced culture, which is a great pride of Korean nation possessed of a time-honoured history, ardent patriotism, strong national self-respect and unexcelled resourcefulness and wisdom.
...
Jo Jun 3, 2022
The contests lasted from 6 to 23 May, 2022.
The first contest was held on May 6 to 9. It drew over 17 000 contestants from tens of countries and regions including our country, and India. More than 90 participants competed in Division 1, over 800 in Division 2, some 2 900 in Division 3 and over 13 900 in Division 4.
A total of 14 contestants won the first place in Division 1 ― 10 from the DPRK, 2 from India, 1 from Italy and 1 from Japan. 6 out of the 10 winners of our country are students at Kim Chaek University of Technology. As much as 71.4287% of the world winners are from the DPRK, and 42.857% are from Kim Chaek University of Technology. KUT students add up to 60% of the 10 DPRK winners.
The second contest went on from 20 to 23. Over 18 000 contestants from tens of countries and regions including our country and India took part. Some 110 contestants competed in Division 1, more than 1 100 in Division 2, over 2 900 in Division 3 and more than 14 200 in Division 4.
A total of 17 winners in Division 1 include 7 from the DPRK, 4 from India, 2 from China, 1 from Singapore, 1 from Taipeh, China and 2 from Japan.
6 out of the 7 DPRK winners are students from Kim Chaek University of Technology. Our country and KUT make up 41.176% and 35.294% of the world winners, respectively. KUT students account for 85.714% of the DPRK winners.
...
Jo Jun 2, 2022
Here is Kyongru-dong like a beautiful gem true to the meaning of its name in the centre of Pyongyang, capital of the DPRK.
Everything here including the bus stops, underground crossings, street lamps, etc. blends well with the Pothong riverside and the terraced residential district, which gives us an impression of being on the fairyland.
Walking up the exquisite stone steps, we could notice the plate bearing Block No. 12 in big fonts attached on the front door, which led us into the house of Merited Scientist, Candidate Academician, Prof. PhD. Ri Mu Chol, a section head at the Bioengineering Institute.
He and his son PhD. Ri Hwi Song, a researcher at the Faculty of Biology and Medicine Engineering, welcomed us, saying that they still could hardly believe this dreamlike reality.
The living room, study, kitchen, storeroom, …
Every element in the dwelling including the arrangement and colour of all the furnishings and lighting was on the highest level in the aspects of practicability, aesthetics and environment.
We could enjoy the beauty of the Pothong River flowing placidly in front of the spacious balcony where some fresh and green young pine trees were growing like a piece of painting.
Indeed, it was like a dream that ordinary working people are living in such luxurious dwellings in Kyongru-dong with fine scenery and good living conditions.
This is not a dream, but the reality in the DPRK.
We were totally absorbed in looking round the rooms when Ri Mu Chol told us as follows.
“It is really unbelievable that I am honoured to live here. I couldn’t believe that this is my own house even when I was handed over the entrance certificate and even when I was looking round it after the completion ceremony. But it turned out to be the reality, not a dream. Ordinary educators, scientists, workers, writers and artists like me became the owners of these new dwellings.”
This is not the remark from his heart alone.
It is from the hearts of all educators and scientists including Ri Tong Ju, a section head at the Faculty of Mechanical Science and Technology, O Su Yong, a section head at the Faculty of Heat Engineering, Kwon Chang Dok, a section head at the Faculty of Mining Engineering, Ri Mu Chol, a section head at the Bioengineering Institute, Son Ryong Chol, a section head at the Faculty of Materials Science and Technology, Jong Kwang Chon, a researcher at the Faculty of Materials Science and Technology, Min Chol U, a researcher at the Robotics Institute, Kim Chol Ryong, dean of the Faculty of Electrical Engineering, etc. It is from the hearts of all the people across the country.
It is not a dream, but reality.
...
Jo May 27, 2022
NTC (Negative Temperature Coefficient) thermistors are used in many electrical and electronic products including mobile phones, PCs and their peripherals, secondary batteries, LCDs, etc. for measurement, adjustment, compensation and time delay of their temperature, and voltage adjustment and noise reduction.
For most temperature sensing applications the NTC thermistors are made of spinel manganite.
Thick film thermistors are of several types such as sandwich, multilayer, segmented and interdigitated, and the methods of calculating resistivity and B value for these types are different.
Multilayer NTC thermistors are made up of inner metal electrodes and paralleled layers of NTC thermistor ceramics. In the process of manufacturing, stresses are produced between the components of multilayer NTC thermistors due to mechanical, thermal and electrical loads.
These stresses in multilayer electronic components can be simulated through the finite element method (FEM) and calculated by analytical models and measured by X-ray diffraction (XRD).
Compared to other methods, FEM proves to be more convenient for analysis of more detailed overall stresses in multilayer electronic components under various loads.
Up to now, scientists have often used two-dimensional models for considering the details of multilayer thermistors, but these models cannot fully display the distribution of stresses of multilayer thermistors.
Therefore, 3D finite element analyses (FEA) are more suitable for further study into the effects of the design parameters of multilayer thermistors on the stresses.
The research results show that manipulation of the length of the lateral margin most significantly influences the maximum principal stress experienced in multilayer thermistors during soldering process. In addition, the number of inner electrodes also contributes to the tensile stress that occurs in the soldering process.
More information about this can be found in the paper “The Simulation Study on Internal Stress in Multilayer Thermistors during Soldering Process” presented by Yu Nam Chol, a researcher at the Science Engineering Institute, to the SCI Journal “Solid State Electronics Letters”.
...
Jo May 24, 2022
Materials selection is a multi-criteria decision-making (MCDM) whereby materials designers and engineers have to select optimal material among two or more alternatives based on two or more criteria.
Many MCDM methods are applicable to the materials selection. These include rank sum ratio (RSR), simple additive weighting (SAW), weighted product method (WPM), analytic hierarchy process (AHP), technique for order preference by similarity to ideal solution (TOPSIS), VIse Kriterijumska Optimizacija Kompromisno Resenje (VIKOR) method, elimination and et choice translating reality (ELECTRE) method, preference selection index (PSI) method, preference ranking organization method for enrichment evaluations (PROMETHEE), grey relational analysis (GRA), complex proportional assessment (COPRAS) method, range of value method (ROVM), EXPROM, etc.
As materials selection may vary with the weights of materials selection criteria, the weights of materials selection criteria play an important role in materials selection by the MCDM methods.
Up to now, analytic hierarchy process (AHP) and entropy weighting method have widely been used to determine the weights of materials selection criteria. The AHP method is a subjective method while the entropy weighting method is an objective method. While objective weighting methods such as the entropy method fail to reflect the opinions of the materials designers and engineers, the AHP method can do it.
This is why the AHP method has mostly been applied to determine the weights of the materials selection criteria in many materials selection problems.
However, it still has some drawbacks. The major drawbacks to the AHP are as follows:
First, it is difficult to meet the consistency requirement of the pairwise comparisons.
Second, the pairwise comparison matrix (PCM) can hardly be constructed.
The solution is the introduction of a PCM construction method based on a new simplest questionnaire and a new modifying method of inconsistent PCM based on CR decrements.
Three indices are introduced to evaluate the effectiveness of the modifying method of inconsistent PCM.
• CR decrement ΔCR(A,B):
• Deviation index DI(A,B):
• Consistency ratio improving rate CRIR(A,B):
The results of analysis show that the simplest questionnaire helps materials designers and engineers to perform pairwise comparison judgments and the construction of PCM simply, easily and concisely without confusion, even if they have no knowledge and experience about the AHP method and that the modifying method based on CR decrements improves the consistency of inconsistent PCM better and faster by modifying a smaller number of elements with a smaller amount of modification.
This indicates that the simplest questionnaire and the modifying method could be widely used for calculating the weights of materials selection criteria or materials property indices in materials design and applications such as materials selection and optimization.
You can find more information about this in the paper “Materials selection criteria weighting method using analytic hierarchy process (AHP) with simplest questionnaire and modifying method of inconsistent pairwise comparison matrix” presented by Yang Won Chol, a researcher at the Faculty of Materials Science and Technology, to the SCI Journal “Proc IMechE Part L: Journal of Materials: Design and Applications” 2022, Vol. 236(1) 69–85.
...